How to Remove Your Retrax Bed Cover: A Step-by-Step Guide 12

Introduction

Removing your Retrax bed cover can be a daunting task, especially if you’re not familiar with the process. However, with the right guidance, you can easily take off your Retrax cover and enjoy the benefits of a bed cover that is designed to provide protection and security for your truck bed. In this comprehensive guide, we will walk you through the steps to remove your Retrax bed cover, ensuring a smooth and hassle-free experience.

Retrax bed cover Tools Needed

Before you start, make sure you have the following tools:

1. 2-10×32 screws: These screws are used to secure the cover to the truck bed.
2. 1/8” Allen wrench: This wrench is used to loosen the screws.
3. Phillips screwdriver: This screwdriver is used to remove the shipping brackets.
4. Wire ties: These ties are used to secure the wiring harness.

Step-by-Step Instructions

1. Remove the Shipping Brackets: Start by removing the shipping brackets from both ends of the spiral canister. This will give you access to the cover.
2. Loosen the Screws: Use the 1/8” Allen wrench to loosen the screws that secure the cover to the truck bed. Turn the screws counterclockwise until they are loose.
3. Remove the Cover: Once the screws are loose, you can remove the cover from the truck bed. Lift the cover off the bed and set it aside.
4. Disconnect the Wiring Harness: Use the wire ties to disconnect the wiring harness from the cover. This will allow you to remove the cover without any electrical connections.Retrax bed cover
5. Remove the Drain Tubes: Remove the drain tubes from the cover and set them aside. These tubes are used to drain water from the truck bed.
6. Remove the Weather-Stripping: Remove the weather-stripping from the cover and set it aside. This will allow you to access the inside of the cover.
7. Remove the Lock: Remove the lock from the cover and set it aside. This will allow you to access the inside of the cover.Retrax bed cover 
8. Remove the Cover: Once you have removed all the components, you can remove the cover from the truck bed. Lift the cover off the bed and set it aside.

Tips and Tricks

1. Use the Right Tools: Make sure you have the right tools for the job. The 1/8” Allen wrench and Phillips screwdriver are essential for removing the screws and shipping brackets.
2. Be Patient: Removing the cover can be a time-consuming process. Be patient and take your time to ensure that you remove all the components correctly.
3. Use a Friend: It’s always a good idea to have a friend help you remove the cover. This will make the process easier and less stressful.
4. Check the Warranty: Before removing the cover, check your warranty to see if it covers any parts or labor. Retrax bed cover

Conclusion

Removing your Retrax bed cover is a relatively simple process that requires the right tools and a little patience. By following the steps outlined in this guide, you can easily remove your cover and enjoy the benefits of a bed cover that is designed to provide protection and security for your truck bed. Remember to always check your warranty before removing the cover and to use the right tools for the job.

The warranty on your Retrax bed cover covers defects and malfunctions for a specified period. However, it does not cover normal wear and tear, water intrusion, or damage caused by external factors such as acts of God or misuse. The user is responsible for properly maintaining the product, including cleaning and lubricating the tracks and sealed ball bearings. Failure to do so may void the warranty. The Retrax bed cover is designed for specific purposes and is not intended for use in extreme conditions such as heavy snow or ice. Additionally, it is not waterproof and may collect water, which must be removed before opening the cover.